The General Applications of Hydrocarobn Reisns

Properties and functions of Hydrocarbon Resins in different fields.

Hydrocarbon Resin C9 are used in Paint.

Paints mainly use C9 Hydrocarbon Resin,DCPD HydrocarbonResin and C5/C9 Copolymerized Hydrocarbon Resin with high Softening Point 120.Hydrocarbon Resins can increase the final finishes of paints,the adhesiveness of paints films,the hardness and resistance to acid alkaline.

Hydrocarbon Resin C9 are used in Printing Ink.

Usually,the C9 Hydrocarbon Resin and DCPD Hydrocarbon Resin which have high Softening Point are used for printing inks,they have color-spreading,fast-dry and brightening effects and will increase the printing property.

Hydrocarbon Resin C5 are used in Adhesives or Materials based on Adhesives.

Hydrocarbon Resin itself has very good adhesiveness,they can strengthen the adhesiveness of adhesives,resistance to acid,alkaline and water,they will reduce the production cost.

Hydrocarbon Resin C5,C9 and C5/C9 Copolymerization are used in Rubber and Tyre.

C5 Hydrocarbon Resin,C5/C9 Copolymerized Hydrocarbon Resin and DCPD Hydrocarbon Resins with low Softening Point are mainly used with rubbers which kinds have good mutual solubility with rubber particles,no influence on the sulphuration of rubber. Rubbers added with Petroleum Resins will increase the strength,adhesiveness and softening characters.

Hydrocarbon Resin are used in other fields.

Hydrocarbon Resins have a certain unsaturation Property and can be used as paper glutting agents,plastic modifiers etc.

Popular posts from this blog

Hydrogenated DCPD Hydrocarbon Resins

Image
Hydrogenated DCPD Petroleum Resin with the grade of HCR-D100H and HCR-D110H are waterwhite Hydrogenated DCPD resins obtained from polymerization and hydrogenation of cyclic ingredients derived monomers. Our Hydrogenated DCPD Resins are mainly used in EVA/ APAO based hot melt adhesives, Pressure Sensitive Adhesives owing to light color, good heat stability and wide compatibility with other resins and polymers. Key Characters: Good compatibility with EVA,SBC,Metallocene polyolefins, APAO Good heat stability Good initial color and low VOC Water resistance S pecifications     Items         HCR-D100H        HCR-D110H  Softening Point (R&B)°C          100-110         110-120  Color No. (50% resin solid in Toluene)Ga#          1.0 max         1.0 max  Acid Value (mgKOH/g)          0.10 max         0.10 max  Melt Viscosity (@160°C)mPa.s          2800 max        2800 max  Heat Stability( 4H@180°C)Ga#          2.0 max        2.0 max Recommend Fields: HMA,PSA, Sealants, Book-
Read more

C5 Hydrocarbon Resins

Image
C5 Petroleum Resin for Hot Melt Adhesives C5 Petroleum Resin with the grades of HCR-A5094,HCR-A5100, HCR-A5101 are refined C5 Petroleum Hydrocarbon Resins for the Hot Melt Adhesive and Pressure Sensitive. They have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, Ethylene Vinyl Acetate (EVA) and styrene block copolymer such as SIS, SBS, SEBS, and SEPS. Additionally, they also have a good compatibility with the natural Tackifier resins such as Terpene, rosin and thereof derivatives. They could provide enhanced performance in Hot Melt Adhesive applications.... Detail C5 Petroleum Resin for Hot Melt Road Marking Paint C5 Petroleum Resin with the grade of HCR-R5100 and HCR-R5101 are two brand-new refined high-class C5 Aliphatic Hydrocarbon Resin specially designed as a bonder to meet the technical requirements for hot melt road marking paint in Asian and American Markets. ... Detail C5 Petroleum Resin for Rub
Read more

C5 Petroleum Resin for Rubber and Tyre Compounding

Image
                     C5 Petroleum Resin for Rubber and Tyre Compounding Our Petroleum Resins with the grades of HCR-C5100 and HCR-C5101 is a series of Petroleum Resins are pure C5 Aliphatic Hydrocarbon Resins without aormatic content applied exclusively in tire and rubber compounding.  C5 Aliphatic Hydrocarbon Resins  have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, polyethylene, polypropylene,  Styrene -Isoprene- Styrene  (SIS),  Styrene -ethylene-butadiene- styrene ( SEBS) and Ethylene Vinyl Acetate (EVA), and also have a good compatibility with the natural tackifying resins (such as Terpene, Rosin and thereof derivatives). Additionally, the product can be used in rubber compounding as tackifying agent, reinforcement agent, softening agent as well as the filling agent, etc. Performance    Light Color Excellent Tackifying Property Good softening and reinforcement properties in rubber mixing process, can e
Read more